1186
Source (Internal)
using the :SOURce:RADio:ARB:TRIGger:INITiate command.
External 2
Sets the current trigger source to External 2. Selecting External 2 enables triggering a waveform by an externally
applied signal.
Trigger InitiateUsed to initiate an immediate trigger event if the trigger source is set to Trigger Key.Waveform SequencesAllows access to the waveform sequence sub-menus. Pressing this key changes the central view area to display the Waveform Sequence List view.
Build New Sequence
Allows access to the sub-menus for creating a new waveform sequence. Pressing this key changes the central view
area to display the Waveform Sequence Creation and Editing view.
Key Path: Source, Modulation Setup, ARB, Trigger Source
Example: SOUR:RAD:ARB:TRIGger BUS
Initial S/W Revision: A.05.00
Key Path: Source, Modulation Setup, ARB, Trigger Source
Example: SOUR:RAD:ARB:TRIGger EXT2
Initial S/W Revision: A.05.00
Key Path: Source, Modulation Setup, ARB
Notes: No remote command, SCPIfront panel only.
Initial S/W Revision: A.05.00
Key Path: Source, Modulation Setup, ARB
Notes: No remote command, SCPI front panel only.
Initial S/W Revision: A.05.00
Key Path: Source, Modulation Setup, ARB, Waveform Sequences
Notes: No remote command, SCPIfront panel only.
Initial S/W Revision: A.05.00