1399
View/Display
System Display Settings
These settings are "Mode Global" – they affect all modes and measurements and are reset only by
Restore Misc Defaults or Restore System Defaults under System.
Annotation Local Settings
This is a Mode Global override of the meas local annotation settings. When it is All Off, it forces Screen
Annotation, Meas Bar, Trace, and Active Function Values settings to be OFF for all measurements in
all modes. This provides the security based "annotation off" function of previous test sets; hence it uses
the legacy SCPI command.
When it is All Off, the Screen, Meas Bar, Trace, and Active Function Values keys under the Display,
Annotation menu are grayed out and forced to Off. When Local Settings is selected, you are able to set
the local annotation settings on a measurement by measurement basis.
Remote Command: :DISPlay:WINDow[1]:TRACe:Y:DLINe <ampl>
:DISPlay:WINDow[1]:TRACe:Y:DLINe?
:DISPlay:WINDow[1]:TRACe:Y:DLINe:STATe OFF|ON|0|1
:DISPlay:WINDow[1]:TRACe:Y:DLINe:STATe?
Example: DISP:WIND:TRAC:Y:DLIN:STAT ON
DISP:WIND:TRAC:Y:DLIN:STAT –32 dBm
Preset: Set the Display Line to Off and –25 dBm on Preset. When the Display Line
goes from Off to On, if it is off screen, set it to either the top or bottom of
screen, depending on which direction off screen it was.
The Display Line's value does not change when it is turned off.
State Saved: Saved in instrument state.
Min: – (minus infinity) in current units
Max: + (plus infinity) in current units
Default Unit: Depends on the current selected Y axis unit
Initial S/W Revision: Prior to A.02.00
Key Path: View/Display, Display
Initial S/W Revision: Prior to A.02.00
Key Path: View/Display, Display, System Display Settings
Remote Command: :DISPlay:WINDow[1]:ANNotation[:ALL] OFF|ON|0|1
:DISPlay:WINDow[1]:ANNotation[:ALL]?
Example: :DISP:WIND:ANN OFF
Preset: On (Set by Restore Misc Defaults)