289
System Functions
System
Control Panel…
Opens the Windows Control Panel. The Control Panel is used to configure certain elements of Windows
that are not configured through the hardkey/softkey System menus.
The Control Panel is a separate Windows application, so to return to the analyzer once you are in the
Control Panel, you may either:
Exit the Control Panel by clicking on the red X in the upper right hand corner, with a mouse
Or use Alt-Tab: press and hold the Alt key and press and release the Tab key until the Analyzer
logo is showing in the window in the center of the screen, as above, then release the Alt key.
Example: :SYST:DEF ALL
Couplings: An All will cause the currently running measurement to be aborted and get all
modes to a consistent state, so it is unnecessary to couple any settings.
Initial S/W Revision: Prior to A.02.00
Key Path: System
Notes: No remote command for this key.
Initial S/W Revision: Prior to A.02.00