1226
Source (Internal)
None
Selects no radio standard for use on the current step.
GSM/EDGE
Pressing this key once selects GSM/EDGE as the radio standard and the current GSM/EDGE band as the active
channel band. Pressing this key again allows access to the sub-menus for selecting a different GSM/EDGE band.
P-GSM
Selects P-GSM as the band for the current step.
E-GSM
Selects E-GSM as the band for the current step.
R-GSM
Selects R-GSM as the band for the current step.
DCS 1800
Selects DCS 1800 as the band for the current step.
Key Path: Source, List Sequencer, List Sequencer Setup, Radio Setup, Radio
Standard
Example: SOUR:LIST:STEP2:SET:RAD:BAND NONE
Notes: SCPI is supported after A.09.40
Initial S/W Revision: A.05.00
Key Path: Source, List Sequencer, List Sequencer Setup, Radio Setup, Radio
Standard
Initial S/W Revision: A.05.00
Key Path: Source, List Sequencer, List Sequencer Setup, Radio Setup, Radio
Standard, GSM/EDGE
Initial S/W Revision: A.05.00
Key Path: Source, List Sequencer, List Sequencer Setup, Radio Setup, Radio
Standard, GSM/EDGE
Initial S/W Revision: A.05.00
Key Path: Source, List Sequencer, List Sequencer Setup, Radio Setup, Radio
Standard, GSM/EDGE
Initial S/W Revision: A.05.00
Key Path: Source, List Sequencer, List Sequencer Setup, Radio Setup, Radio
Standard, GSM/EDGE