813
QPSK EVM Measurement
Meas Setup
IF Gain State
Selects the range of IF gain.
Meas Preset
Restores all the measurement parameters to their default values.
State Saved Saved in instrument state.
Range Auto|Man
Instrument S/W Revision Prior to A.02.00
Remote Command [:SENSe]:EVMQpsk:IF:GAIN[:STATe] ON|OFF|1|0
[:SENSe]:EVMQpsk:IF:GAIN[:STATe]?
Example EVMQ:IF:GAIN ON
EVMQ:IF:GAIN?
Key Path Meas Setup, Advanced, IF Gain
Mode WCDMA, C2K, 1xEVDO
Notes This only applies to the RF input. It does not apply to baseband I/Q input.
where ON = high gain
OFF = low gain
Preset OFF
State Saved Saved in instrument state.
Range Low Gain (Best for Large Signals)|High Gain (Best Noise Level)
Readback Text Low Gain|High Gain
Instrument S/W Revision Prior to A.02.00
Remote Command :CONFigure:EVMQpsk
Example CONF:EVMQ
Key Path Meas Setup
Mode WCDMA, C2K, 1xEVDO
Notes Restore all defaults of parameters.
Instrument S/W Revision Prior to A.02.00