320
Channel Power Measurement
BW
Video BW
Changes the analyzer post-detection filter (VBW).
Preset: WCDMA: 240 kHz
C2K: 24 kHz
WIMAX OFDMA: 100kHz
1xEVDO: 30kHz
LTE: Auto
LTETDD: Auto
WLAN: 100 kHz
WCDMA, C2K, 1xEVDO , WIMAX OFDMA, WLAN: OFF
LTE, LTETDD: ON
State Saved: Saved in instrument state.
Min: 1 Hz
Max: 8 MHz
Backwards Compatibility SCPI: [:SENSe]:CHPower:BWIDth[:RESolution]
Initial S/W Revision: Prior to A.02.00
Modified at S/W Revision: A.02.00, A.03.00
Key Path: BW
Mode: WCDMA, C2K, WIMAX OFDMA, 1xEVDO, LTE, LTETDD, WLAN
Remote Command: [:SENSe]:CHPower:BANDwidth:VIDeo <bandwidth>
[:SENSe]:CHPower:BANDwidth:VIDeo?
[:SENSe]:CHPower:BANDwidth:VIDeo:AUTO ON|OFF|1|0
[:SENSe]:CHPower:BANDwidth:VIDeo:AUTO?
Example: CHP:BAND:VID 2.4 MHz
CHP:BAND:VID?
CHP:BAND:VID:AUTO OFF
CHP:BAND:VID:AUTO?
Notes: You must be in the W-CDMA mode, cdma2000 mode, LTD mode, LTE TDD
mode, WLAN mode, 1xEVDO mode, or WIMAX OFDMA mode to use this
command. Use :INSTrument:SELect to set the mode.
Dependencies: See Couplings