410
ACP Measurement
Meas Setup
Configure CarriersAccesses a menu that contains Carrier, Carrier Pwr Present, Carrier Width and Carrier Integ BW parameters.CarrierSelects the carrier to configure for the current measurement.
Remote Command [:SENSe]:ACPower:CARRier[1]|2:CPSD <real>
[:SENSe]:ACPower:CARRier[1]|2:CPSD?
Example ACP:CARR:CPSD 25
ACP:CARR:CPSD?
Notes Although the default value is defined, the value is recalculated by the
measurement result just after measurement.
Carrier sub op code. 1 for BTS, 2 for MS. Default is BTS.
You must be in the mode that includes ACP measurements to use this
command. Use :INSTrument:SELect to set the mode.
Dependencies This key is available only when the Meas Type is PSDRef. If the Meas Type is
not PSDRef, this key is grayed out.
Couplings The value of PSD is automatically converted when PSD Unit is changed.
Preset 0.0
State Saved Saved in instrument state.
Min –999
Max 999
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00, A.04.00
Key Path Meas Setup, Carrier Setup
Initial S/W Revision Prior to A.02.00
Key Path Meas Setup, Carrier Setup, Configure Carriers
Mode WCDMA, C2K, WIMAX OFDMA, 1xEVDO, TD-SCDMA, LTE, LTETDD
Couplings Max value is the number of available carriers, so this value might change
when the number of carriers is changed.
Preset 1
State Saved No
Min 1