214
System Functions
Save
For all of the Trace Data Files:
My Documents\<mode name>\data\traces
For all of the Limit Data Files:
My Documents\<mode name>\data\limits
For all of the Measurement Results Data Files:
My Documents\<mode name>\data\<measurement name>\results
For all of the Capture Buffer Data Files:
My Documents\<mode name>\data\captureBuffer
Screen Image
Pressing Screen Image accesses a menu of functions that enable you to specify a format and location for
the saved screen image. It brings up a menu that allows you to specify the color scheme of the Screen
Image (Themes) or navigate to the Save As dialog to perform the actual save.
Screen Image files contain an exact representation of the analyzer display. They cannot be loaded back
onto the analyzer, but they can be loaded into your PC for use in many popular applications.
The image to be saved is actually captured when the Save front panel key is pressed, and kept in
temporary storage to be used if you ask for a Screen Image save. When the Screen Image key is pressed,
a "thumbnail" of the captured image is displayed, as shown below:
Key Path: Save, Data
Mode: All
Notes: The key location is mode-dependent and will vary.
Brings up the Save As dialog for saving a <mode specific> Save Type. The
save is performed immediately and does not wait until the measurement is
complete.
Initial S/W Revision: Prior to A.02.00