Agilent Technologies U9072A cdma-2000 The following table describes the Trace Save and Recall possibilities:

195
System Functions
Recall
The following table describes the Trace Save and Recall possibilities:
From File…
When you press “From File”, the analyzer brings up a Windows dialog and a menu entitled “File Open.”
This menu allows you to navigate to the various fields in the Windows dialog without using a keyboard
or mouse. The Tab and Arrow keys can also be used for dialog navigation.
You want to recall state and one
trace’s data, leaving other traces
unaffected.
Save Trace+State from 1 trace.
Make sure that no other traces are
updating (they should all be in
View or Blank mode) when the
save is performed.
On Recall, specify the trace you
want to load the one trace’s data
into. This trace will load in View.
All other traces’ data will be
unaffected, although their trace
mode will be as it was when the
state save was performed.
You want to recall all traces Save Trace+State from ALL
traces. On Recall, all traces will come back in View (or Blank if they
were in Blank or Background
when saved)
You want all traces to load
exactly as they were when saved. Save State On recall, all traces’ mode and data will be exactly as they were
when saved. Any traces that were
updating willhave their data
immediately overwritten.