Agilent Technologies U9072A cdma-2000 Sets the reference position for the X axis to Left, Center or Right.

557
Spectrum Emission Mask Measurement
Span X Scale
Ref Position
Sets the reference position for the X axis to Left, Center or Right.
Remote Command: :DISPlay:SEMask:VIEW[1]:WINDow[1]:TRACe:X[:SCALe]:PDIVi
sion <freq>
:DISPlay:SEMask:VIEW[1]:WINDow[1]:TRACe:X[:SCALe]:PDIVi
sion ?
Example: DISP:SEM:VIEW:WIND:TRAC:X:PDIV 500
DISP:SEM:VIEW:WIND:TRAC:X:PDIV?
Notes: You must be in a mode that includes the SEM measurement to use this
command. Use INSTrument:SELect to set the mode.
Couplings: If Auto Scaling is set to On, this value is automatically determined by the
measurement result. When you set this value manually, Auto Scaling
automatically changes to Off.
Preset: Automatically Calculated
State Saved: Yes Saved in instrument state.
Min: 1 Hz
Max: 10.0 GHz
Initial S/W Revision: A.11.00
Key Path: SPAN X Scale
Mode: WCDMA, CDMA2K, EDGEGSM, WIMAXOFDMA, TDSCDMA,
CDMA1XEV, LTE, LTETDD, WLAN
Remote Command: :DISPlay:SEMask:VIEW[1]:WINDow[1]:TRACe:X[:SCALe]:RPOSi
tion LEFT|CENTer|RIGHt
:DISPlay:SEMask:VIEW[1]:WINDow[1]:TRACe:X[:SCALe]:RPOSi
tion?
Example: DISP:SEM:VIEW:WIND:TRAC:X:RPOS LEFT
DISP:SEM:VIEW:WIND:TRAC:X:RPOS?
Notes: You must be in a mode that includes the SEM measurement to use this
command. Use INSTrument:SELect to set the mode.
Preset: CENTer
State Saved: Yes Saved in instrument state.
Range: Left|Ctr|Right
Initial S/W Revision: A.11.00