344
Channel Power Measurement
Meas Setup
Power Limit Fail (remote command only)
The command is query only and used to query if power test passes or fails.
PSD Limit
If PSD (power spectral density) Limit is ON, PSD Limit is used as threshold which can judge whether
the real measured PSD can be passed or not. If real measured PSD exceeds PSD Limit, PSD test fails,
otherwise, it passes. If PSD is off, PSD test is always passed.
Remote Command: :CALCulate:CHPower:LIMit:POWer:FAIL?
Example: CALC:CHP:LIM:POW:FAIL?
Notes: This command is query only.
When Power Limit is off, the returned value is always 0 (pass).
When Power Limit is on, the returned value is 0(pass) while power test passes
and 1(fail) while power test fails.
Initial S/W Revision: A.10.00
Key Path: Meas Setup, Limits
Mode: WCDMA, C2K, WIMAX OFDMA, 1xEVDO, LTE, LTETDD, WLAN
Remote Command: :CALCulate:CHPower:LIMit:PSDensity <real>
:CALCulate:CHPower:LIMit:PSDensity?
:CALCulate:CHPower:LIMit:PSDensity:STATe OFF|ON|0|1
:CALCulate:CHPower:LIMit:PSDensity:STATe?
Example: CALC:CHP:LIM:PSD 4.00
CALC:CHP:LIM:PSD?
CALC:CHP:LIM:POW:STAT ON
CALC:CHP:LIM:POW:STAT?