757
Modulation Accuracy (Composite Rho)
Meas Setup
Meas Preset
Restores all measurement parameters to their default values.
Dependencies/Couplings When either the auto attenuation works (for example, with the electrical
attenuator) or optimize mechanical attenuator range is requested, the IF
Gain setting is changed according to the following rule.
‘Auto’ sets IF Gain to ‘High Gain’ under any of the following conditions:
the input attenuator is set to 0 dB, the preamp is turned on, or the Max
Mixer Level is 20 dBm or lower. For other settings, ‘Auto” sets IF Gain
to ‘Low Gain’.
Remote Command Notes Where ON = high gain
OFF = low gain
Preset OFF
State Saved Saved in instrument state.
Range Low Gain (Best for Large Signals) | High Gain (Best Noise Level)
Key Path Meas Setup, Advanced, IF Gain
Mode cdma2000
Remote Command :CONFigure:RHO
Example CONF:RHO
Key Path Meas Setup, More 1 of 2