784
QPSK EVM Measurement
AMPTD Y Scale
Attenuation
Accesses a menu of functions that enable you to change the attenuation settings. This key has read-back
text that describes the total attenuator value.
See “Attenuation” on page 850 for more information.
This is only available when the selected input is RF.
Scale/Div
Sets the units per division of vertical scale in the logarithmic display. However, since the Auto Scaling is
defaulted to On, this value is automatically determined by the measurement result. When you set a value
manually, Auto Scaling automatically changes to Off.
Scale/Div (Magnitude Error Window)
Sets the sensitivity measurement result in the magnitude error window.
Instrument S/W Revision Prior to A.02.00
Key Path AMPTD Y Scale
Instrument S/W Revision Prior to A.02.00
Key Path AMPTD Y Scale
Instrument S/W Revision Prior to A.02.00
Remote Command :DISPlay:EVMQpsk:VIEW2:WINDow[1]:TRACe:Y[:SCALe]:PDIVis
ion <real>
:DISPlay:EVMQpsk:VIEW2:WINDow[1]:TRACe:Y[:SCALe]:PDIVis
ion?
Example DISP:EVMQ:VIEW2:WIND:TRAC:Y:PDIV 25
DISP:EVMQ:VIEW2:WIND:TRAC:Y:PDIV?
Key Path AMPTD Y Scale
Mode WCDMA, C2K, 1xEVDO
Couplings When the Auto Scaling is On, this value is automatically determined by the
measurement result.
When the user sets a value manually, Auto Scaling automatically changes to
Off.
Preset 1
State Saved Saved in instrument state.
Min 0.1