359
Channel Power Measurement
Span X Scale
Full Span
Changes the span to show the full frequency range of the spectrum analyzer.
Preset: WCDMA: 7.5 MHz
C2K: 1.845 MHz
WIMAX OFDMA: 20 MHz
1xEVDO: 2.0MHz
LTE: 7.5 MHz
LTETDD: 7.5 MHz
WLAN:
if Radio Std is 802.11a/g(OFDM/DSSS-OFDM): 30 MHz
if Radio Std is 802.11b: 37.5MHz
if Radio Std is 802.11n(20MHz): 30 MHz
if Radio Std is 802.11n(40MHz: 60 MHz
if Radio Std is 802.11ac (20 MHz): 30 MHz
if Radio Std is 802.11ac (40 MHz): 60 MHz
if Radio Std is 802.11ac (80 MHz): 120 MHz
if Radio Std is 802.11ac (160 MHz): 240 MHz
if Radio Std is 802.11ac (80 MHz + 80 MHz): 360 MHz
State Saved: Saved in instrument state.
Min: 100 Hz
Max: 1 GHz
Max: RF Input: 1 GHz
Initial S/W Revision: Prior to A.02.00
Modified at S/W Revision: A.02.00, A.03.00
Key Path: Span X Scale
Mode: WCDMA, C2K, WIMAX OFDMA, 1xEVDO, LTE, LTETDD, WLAN
Remote Command: [:SENSe]:CHPower:FREQuency:SPAN:FULL
Example: CHP:FREQ:SPAN:FULL
Notes: You must be in the W-CDMA mode, cdma2000 mode, LTD mode, LTE TDD
mode, WLAN mode, 1xEVDO mode, or WIMAX OFDMA mode to use this
command. Use :INSTrument:SELect to set the mode.
Couplings: Selecting full span changes the measurement span value.
Initial S/W Revision: Prior to A.02.00