966
Input/Output
RF Port
Maps one of the sets of corrections to one of the IO ports.
RFIO0
The port to which the current corrections are applied. Pressing this key again allows the user access to the menu for
specifying to which internal device and multiport adapter RF path the corrections for multiport adapter RFIO 0 are
applied.
Key Path: Input/Output, RF Output & Test Set Config, Multiport Adapter,
Corrections, Properties
Mode: SEQAN
Remote Command: [:SENSe]:MPADapter:CORRection:CSET[1]|2|3|4|5|6|7|8|9|1
0|11|12|13|14|15|16:RF:PORT
RFIO|RFIO1|RFIO2|RFIO3|RFIO4|RFIO5|RFIO6|RFIO7
[:SENSe]:MPADapter:CORRection:CSET[1]|2|3|4|5|6|7|8|9|1
0|11|12|13|14|15|16:RF:PORT?
Example: :MPAD:CORR:CSET:RF:PORT RFIO0
Notes:
Dependencies: Only available in EXT
Couplings:
Preset: Unaffected by Preset. Set to RF by Restore Input/Output Defaults
State Saved: Saved in State
Backwards Compatibility SCPI:
Initial S/W Revision: A.10.00
Key Path: Input/Output, RF Output & Test Set Config, Multiport Adapter,
Corrections, Properties, RF Port
Remote Command: [:SENSe]:MPADapter:CORRection:CSET[1]|2|3|4|5|6|7|8|9|1
0|11|12|13|14|15|16:RF:PORT:RFIO0 SOURce |ANALyzer|BOTH
[:SENSe]:MPADapter:CORRection:CSET[1]|2|3|4|5|6|7|8|9|1
0|11|12|13|14|15|16:RF:PORT:RFIO0?
Example: :MPAD:CORR:CSET:RF:PORT:RFIO0 BOTH
Preset: Both
State Saved: Saved in State
Initial S/W Revision: A.10.0