1031
Meas
Meas
The information in this section is common to all measurements. For key and remote command
information for a specific measurement, refer to the section that describes the measurement of interest.
Measurements available under the Meas key are specific to the current Mode.
When viewing Help for measurements, note the following:
NOTE Operation for some keys differs between measurements. The information
displayed in Help pertains to the current measurement. To see how a key operates
in a different measurement, exit Help (press the Cancel Esc key), select the
measurement, then reenter Help (press the Help key) and press that key.

Remote Measurement Functions

This section contains the following topics:
“Measurement Group of Commands” on page 1032
“Current Measurement Query (Remote Command Only) ” on page 1035
“Limit Test Current Results (Remote Command Only)” on page 1036
“Data Query (Remote Command Only)” on page 1036
“Calculate/Compress Trace Data Query (Remote Command Only)” on page 1036
“Calculate Peaks of Trace Data (Remote Command Only)” on page 1041
“Format Data: Numeric Data (Remote Command Only)” on page 1043
“Format Data: Byte Order (Remote Command Only)” on page 1045
Key Path: Front-panel key
Initial S/W Revision: Prior to A.02.00
Initial S/W Revision: Prior to A.02.00