1095
Mode
This information is displayed in the Show System screen. The corresponding SCPI remote commands
are defined here.
“Current Application Model ” on page 1095
“Current Application Revision” on page 1095
“Current Application Options” on page 1096
Current Application Model
Returns a string that is the Model Number of the currently selected application (mode).
Current Application Revision
Returns a string that is the Revision of the currently selected application (mode).
Remote Command: :SYSTem:APPLication[:CURRent][:NAME]?
Example: :SYST:APPL?
Notes: Query returns a quoted string that is the Model Number of the currently
selected application (Mode). Example:
"N9060A"
String length is 6 characters.
Preset: Not affected by Preset
State Saved: Not saved in state, the value will be the selected application when a Save is
done.
Initial S/W Revision: Prior to A.02.00
Remote Command: :SYSTem:APPLication[:CURRent]:REVision?
Example: :SYST:APPL:REV?
Notes: Query returns a quoted string that is the Revision of the currently selected
application (Mode). Example:
"1.0.0.0"
String length is a maximum of 23 characters. (each numeral can be an integer
+ 3 decimal points)
Preset: Not affected by a Preset
State Saved: Not saved in state, the value will be the selected application when a Save is
done.
Initial S/W Revision: Prior to A.02.00