462
ACP Measurement
Trace/Detector
Auto
Sets the detector for the currently selected trace to auto.Detector SelectionSelects a detector to be used by the test set for the current measurement. All traces will use the same detector type, similar to Monitor Spectrum measurement
Key Path Trace/Detector
Mode WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD
Remote Command [:SENSe]:ACPower:DETector:AUTO ON|OFF|1|0
[:SENSe]:ACPower:DETector:AUTO?
Example ACP:DET:AUTO 1
ACP:DET?
Couplings When Detector setting is “Auto” ([:SENSe]:ACPower:DETector:AUTO?),
Detector is set to what the Radio Standard defaults states (see detector section)
for all conditions of Trace Type and for all traces. When set to Manual, all
Traces use the same detector type. When Average State = Off then Trace
Types AVERage, MaxHold and MinHold will not function, since Averaging is
required to be ‘on’ for them to operate.
Preset ON
State Saved Saved in instrument state.
Range ON|OFF
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00
Key Path Trace/Detector
Mode WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD
Remote Command [:SENSe]:ACPower:DETector[:FUNCtion]
AVERage|NEGative|NORMal|POSitive|SAMPle
[:SENSe]:ACPower:DETector[:FUNCtion]?
Example ACP:DET NORM
ACP:DET?