567
Spectrum Emission Mask Measurement
View/Display
3. displays the absolute and relative power levels integrated throughout the bandwidths between the
start and stop frequencies in the text window.
Display
Accesses a menu of functions that enable you to set the display parameters.
See “Display” on page 1393 for more information.
Change Title
Accesses an Alpha Editor menu that enables you to write a title across the top of the display. This menu
contains characters and symbols. that may also be used with the numeric keypad. Press Enter or Return
to complete the entry. Press Cancel (Esc) to cancel the entry and preserve your existing title.
The display title remains until you press Change Title again, or you recall a trace or state, or a Factory
Preset is performed. A title can also be cleared by pressing Title, Clear Title.
Mode: WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD,
WLAN
Remote Command: :DISPlay:SEMask:VIEW:NSELect <integer>
:DISPlay:SEMask:VIEW:NSELect?
Example: DISP:SEM:VIEW:NSEL 2
DISP:SEM:VIEW:NSEL?
Notes: You must be in the mode that includes SEM measurement to use this
command. Use :INSTrument:SELect to set the mode.
Preset: WCDMA, C2K, TD-SCDMA, 1xEVDO, LTE, LTETDD: 1
WIMAX OFDMA, WLAN: 2
State Saved: Saved in instrument state.
Min: 1
Max: 3
Initial S/W Revision: Prior to A.02.00
Modified at S/W Revision: A.02.00, A.03.00, A.10.00
Key Path: Front-panel key
Initial S/W Revision: Prior to A.02.00
Key Path: View/Display
Initial S/W Revision: Prior to A.02.00