383
ACP Measurement
AMPTD Y Scale
See AMPTD Y Scale, “Attenuation” on page 850 in the section for more information.
Scale/Div
Sets the units-per-division of the vertical scale in the logarithmic display. However, since the Auto Scaling is defaulted to On, this value is automatically determined by the measurement result. When you set a value manually, Auto Scaling automatically changes to Off.
Y Axis Unit
Allows you to change the vertical (Y) axis amplitude unit.See “Y Axis Unit” on page 871 under AMPTD Y Scale for more information.
Key Path AMPTD Y Scale
Initial S/W Revision Prior to A.02.00
Key Path AMPTD Y Scale
Mode WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD
Remote Command :DISPlay:ACPower:VIEW[1]:WINDow[1]:TRACe:Y[:SCALe]:PDIV
ision <rel_ampl>
:DISPlay:ACPower:VIEW[1]:WINDow[1]:TRACe:Y[:SCALe]:PDIV
ision?
Example DISP:ACP:VIEW:WIND:TRAC:Y:PDIV 5
DISP:ACP:VIEW:WIND:TRAC:Y:PDIV?
Notes You must be in the mode that includes ACP measurements to use this
command. Use :INSTrument:SELect to set the mode.
Couplings When the Auto Scaling is On, this value is automatically determined by the
measurement result.
When you set a value manually, Auto Scaling automatically changes to Off.
Preset 10.00 dB
State Saved Saved in instrument state.
Min 0.10 dB
Max 20.00 dB
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00
Parameter Name Y Axis Unit
Key Path AMPTD/Y Scale
Initial S/W Revision A.04.00