808
QPSK EVM Measurement
Meas Setup
Meas Offset & Interval

This key is active only in 1xEVDO mode.

Allows you to measure the signal occupying different time domain respectively, such as the pilot in first

half slot.

Meas Offset

Specifies how long after the data capture the signal is observed.

Example CALC:EVMQ:LIM:FERR 100
CALC:EVMQ:LIM:FERR?
Key Path Meas Setup, Limits
Mode WCDMA, C2K, 1xEVDO
Notes Sets the limits of the Frequency Error, which is used to judge the result of the
Frequency Error, whether it passes or fails.
If the measured Frequency Error value is not larger than the limit value, the
result is PASS. Otherwise, the result is FAIL.
Preset 100.0
State Saved Saved in instrument state.
Min 0.0
Max 300000
Instrument S/W Revision Prior to A.02.00
Key Path Meas Setup
Instrument S/W Revision Prior to A.02.00
Remote Command [:SENSe]:EVMQpsk:MEAS:OFFSet <integer>
[:SENSe]:EVMQpsk:MEAS:OFFSet?
Example EVMQ:MEAS:OFFS 464
EVMQ:MEAS:OFFS?
Key Path Meas Setup, Meas Offset & Interval
Mode 1xEVDO
Couplings Coupled with Pre-Defined Ofs/Intvl. It will change according to the selected
type. And Meas Offset + Meas Interval <=2048
Preset 400 chips
State Saved Saved in instrument state.
Min 0 chips