949
Input/Output
already selected, pressing this key accesses the RF output setup functions.
EXT (E6607A/B)
The RF Output & Test Set Config key allows you to set the RF Output Port and multiport adapter unit
which is connected to the EXT by USB for download of calibration data and additional control.
EXT (E6607C)
The RF Output & Test Set Config key allows you to set the RF Output Port and MPA settings.
RF Output
Specifies the RF Output Port used.
Switching from the RF Output port to one of the RFIO ports changes the transmitter performance of the
instrument.
RF Out
The RF port that will be used for the current output
Key Path: Input/Output
Dependencies: Only available in EXT
Preset: All settings under this key are returned to their default state when Restore
Input/Output Defaults is pressed.
State Saved: Saved in State
Initial S/W Revision: A.10.00
Key Path: Input/Output, RF Output & Test Set Config
Remote Command: [:SENSe]:FEED:RF:PORT:OUTPut RFOut|RFIO1|RFIO2
[:SENSe]:FEED:RF:PORT:OUTPut?
Example: :FEED:RF:PORT:OUTP RFIO1
Dependencies: Only available in EXT
Preset: This is unaffected by Mode Preset but is set to RFOut on a "Restore
Input/Output Defaults" or "Restore System Defaults -> All"
State Saved: Saved in State
Readback Text: The current RF Output Port selected is read back to this key
Initial S/W Revision: A.05.01
Key Path: Input/Output, RF Output & Test Set Config, RF Output
Example: :FEED:RF:PORT:OUTP RFO
Dependencies: Only available in EXT