680
Code Domain
Marker
Properties
Access a menu that enables you to select a relative maker and marker traceMarker Select
Displays 12 markers available for selection.
Relative To
Selects the marker the selected marker is relative to (its reference marker).
Key Path Marker
Key Path Marker
Mode cdma2000
Remote Command :CALCulate:CDPower:MARKer[1]|2|3|4|5|6|7|8|9|10|11|1
2:REFerence <integer>
:CALCulate:CDPower:MARKer[1]|2|3|4|5|6|7|8|9|10|11|1
2:REFerence?
Example CALC:CDP:MARK:REF 4
CALC:CDP:MARK:REF?
Restriction and Notes A marker cannot be relative to itself so that choice is grayed out, and if
sent from SCPI generates error –221: “Settings conflict; marker cannot
be relative to itself.”
Remote Command Notes When queried a single value is returned (the specified marker numbers
relative marker).
A marker cannot be relative to itself so that choice is grayed out, and if
sent from SCPI generates error –221: “Settings conflict; marker cannot
be relative to itself.”
You must be in the Spectrum Analysis mode, GSM mode to use this
command. Use INSTrument:SELect to set the mode.
Preset 2|3|4|5|6|7|8|9|10|11|12|1
State Saved Saved in instrument state.
Min 1
Max 12
Key Path Marker, Properties