1181
Source (Internal)
Baseband Freq Offset
Allows you to adjust the value by which the baseband frequency is offset relative to the carrier.
Trigger TypeAllows access to the trigger type sub-menus. The setting for trigger type determines the behavior of the waveform when it plays.Remote Command: :SOURce:RADio:ARB:RSCaling <real>
:SOURce:RADio:ARB:RSCaling?
Example: SOUR:RAD:ARB:RSC 100.00
Dependencies: When a new waveform is selected for playback the settings contained within
the associated waveform header file are applied to the ARB. The run-time
scaling is one of the values stored within the header file. If the newly selected
waveform file has an associated header file, the run-time scaling is updated
with the value from the header file. The run-time scaling will remain
unchanged if the newly selected waveform does not have an associated header
file.
Preset: 70.00 %
Min: 1.00 %
Max: 100.00 %
Initial S/W Revision: A.05.00
Key Path: Source, Modulation Setup, ARB, ARB Setup
Remote Command: :SOURce:RADio:ARB:BASeband:FREQuency:OFFSet <freq>
:SOURce:RADio:ARB:BASeband:FREQuency:OFFSet?
Example: SOUR:RAD:ARB:BAS:FREQ:OFFS 0.00 Hz
Dependencies: When a new waveform is selected for playback the settings contained within
the associated waveform header file are applied to the ARB. The baseband
frequency offset is one of the values stored within the header file. If the newly
selected waveform file has an associated header file, the baseband frequency
offset is updated with the value from the header file. The baseband frequency
offset will remain unchanged if the newly selected waveform does not have an
associated header file.
Preset: 0.00 Hz
Min: –50.00 MHz
Max: 50.00 MHz
Initial S/W Revision: A.05.00
Key Path: Source, Modulation Setup, ARB