203
System Functions
Recall
occurs as soon as the Open button is pressed.
Open…
When you press “Open”, the analyzer brings up a Windows dialog and a menu entitled “File Open.”
This menu allows you to navigate to the various fields in the Windows dialog without using a keyboard
or mouse. The Tab and Arrow keys can also be used for dialog navigation.
See “From File…” on page 195in Recall, State, for a full description of this dialog and menu.
Key Path: Recall
Mode: All
Notes: The menu is built from whatever data types are available for the mode. Some
keys will be missing completely, so the key locations in the sub-menu will
vary.
No SCPI command directly controls the Data Type that this key controls. The
Data Type is included in the MMEM:LOAD commands.
Dependencies: If a file type is not used by a certain measurement, it is grayed out for that
measurement. The key for a file type will not show at all if there are no
measurements in the Mode that support it.
Preset: Is not affected by Preset or shutdown, but is reset during Restore Mode
Defaults
Readback: The data type that is currently selected
Initial S/W Revision: Prior to A.02.00
Key Path: Recall, Data
Notes: The key location is mode-dependent and will vary.
Brings up Open dialog for recalling a <mode specific> Save Type
Initial S/W Revision: Prior to A.02.00