1178
Source (Internal)
Segments in ARB Memory
Allows you access to the sub-menus for managing the files within ARB memory.
Delete Segment From ARB Mem
Allows you to remove a segment from ARB playback memory.
Delete All From ARB Memory
Allows you to remove all segments from ARB playback memory.
Key Path: Source, Modulation Setup, ARB, Select Waveform
Initial S/W Revision: A.05.00
Key Path: Source, Modulation Setup, ARB, Select Waveform, Segments in ARB
Memory
Remote Command: :SOURce:RADio:ARB:DELete <string>
Example: SOUR:RAD:ARB:DEL “testwaveform.bin”
Notes: <string> - specifies the waveform to be deleted from the ARB playback
memory.
When in Sequence Analyzer mode and Include Source is Yes, an attempt to
delete a file from ARB memory is rejected with an error.
When Include Source is No and you specify a file that does not exist within
ARB memory, an error is generated.
It is possible to delete files from within the ARB memory when the ARB is
ON. However, if you attempt to delete the file that is currently playing an error
is generated.
It is possible to delete a file from within the ARB memory when the sequencer
state is ON and the file is not being used by the List Sequencer. If you attempt
to delete a file which is being used by the list sequencer, an error is generated.
When sequencer state is On, even if ARB state is On, the selected waveform
will not be played. In this case, if the selected waveform is not used in List
Sequence, it can be deleted and the ARB state is turned Off.
If the ARB is ON and you load a file to ARB memory or delete a file from
ARB memory, the playing waveform segment may not keep phase continuity
during the ARB memory operation. The waveform will be replayed after the
ARB operation is finished.
Initial S/W Revision: A.05.00
Key Path: Source, Modulation Setup, ARB, Select Waveform, Segments in ARB
Memory
Remote Command: :SOURce:RADio:ARB:DELete:ALL
Example: SOUR:RAD:ARB:DELete:ALL