1100
Mode
it is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
LTE
Selects the LTE mode for general purpose measurements of signals following the LTE FDD standard.
There are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed information. If
it is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
LTE TDD
Selects the LTE TDD mode for general purpose measurements of signals following the LTE TDD
standard. There are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed information. If
it is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Sequence Analyzer
Selects the Sequence Analyzer mode for sequenced measurements. Depending on licensed applications
there may be a number of different measurements available in this mode. These measurements are all
done on IQ captured data and can be set up to calculated on any part of the capture.
If you are using the Help feature, this mode must be currently active to access its detailed information. If
it is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path: Mode
Example: INST:SEL BASIC
INST:NSEL 8
Initial S/W Revision: Prior to A.02.00
Key Path: Mode
Example: INST:SEL LTE
INST:NSEL 102
Initial S/W Revision: Prior to A.02.00
Key Path: Mode
Example: INST:SEL LTETDD
INST:NSEL 105
Initial S/W Revision: A.03.00
Key Path: Mode
Example: INST:SEL SEQAN
INST:NSEL 400