309
System Functions
User Preset
Save User Preset

Saves the currently active mode and its State. You can recall this User Preset file by pressing the User

Preset menu key or sending the SYST:PRES:USER remote command. This same state is also saved by

the Save State function.

Remote Command: :SYSTem:PRESet:USER:ALL
Example: :SYST:PRES:USER:SAVE
:SYST:PRES:USER:ALL
Notes: Clears all pending OPC bits. The Status Byte is set to 0.
:SYST:PRES:USER:SAVE is us ed to save the current state as the user preset
state.
Couplings: A user preset will cause the currently running measurement to be aborted,
cause a mode switch to the power-on mode, and cause the saved measurement
to be active in the power-on mode. Recalling a User Preset file has the same
issues that recalling a Save State file has. Some settings may need to be
limited and therefore re-coupled, since the capabilities of the mode may have
changes when the User Preset file was last saved.
Initial S/W Revision: Prior to A.02.00
Key Path: User Preset
Remote Command: :SYSTem:PRESet:USER:SAVE
Example: :SYST:PRES:USER:SAVE
Notes: :SYST:PRES:SAVE creates the same file as if the user requested a *SAV or a
MMEM: STOR:STAT, except User Preset Save does not allow the user to
specify the filename or the location of the file.
Initial S/W Revision: Prior to A.02.00