313
Channel Power Measurement
Remote Command Results for WLAN Channel Power Measurement
n Results Returned
n=1 (or not
specified) Returns scalar results:
When the radio standard is NOT WLAN 802.11ac 80 + 80 MHz:
1. Channel Power is a floating point number representing the total channel power in the
specified integration bandwidth.
2. PSD (Power Spectral Density) is the power in the specified unit bandwidth. The unit
bandwidth is selected by the PSD Unit parameter in either dBm/Hz or dBm/MHz.
When the radio standard is WLAN 802.11ac 80 + 80 MHz:
1. Channel Power of the carrier of which the center frequency is indicated by Freq
Segment 1 is a floating point number representing the total channel power of the first
segment in the specified integration bandwidth.
2. PSD (Power Spectral Density) of the carrier of which the center frequency is
indicated by Freq Segment 1 is the power in the specified unit bandwidth of the first
segment. The unit bandwidth is selected by the PSD Unit parameter in either dBm/Hz
or dBm/MHz.
3. Channel Power of the carrier of which the center frequency is indicated by Freq
Segment 2is a floating point number representing the total channel power of the
second segment in the specified integration bandwidth.
4. PSD (Power Spectral Density) of the carrier of which the center frequency is
indicated by Freq Segment 2is the power in the specified unit bandwidth of the second
segment. The unit bandwidth is selected by the PSD Unit parameter in either dBm/Hz
or dBm/MHz.
2 Returns floating point numbers that are the captured trace data of the power (in
dBm/resolution BW) of the signal. The frequency span of the captured trace data is
specified by the Span key.
Key Path: Meas
Mode: WCDMA, C2K, WIMAX OFDMA, 1xEVDO, LTE, LTETDD, WLAN
Initial S/W Revision: Prior to A.02.00
Modified at S/W Revision: A.03.00