166
About the cdma2000 Measurement Application
What does the cdma2000 application do?
What does the cdma2000 application do?
The cdma2000 application can be used to test a cdma2000 transmitter and IS95 signals with the Radio
configuration 1 and 2. It is manufactured according to the following standards documents:
• 3GPP2 C.S0002 Physical Layer Standard for cdma2000 Spread Spectrum Systems
• 3GPP2 C. S0010 Recommended Minimum Performance Standards for cdma2000 Spread Spectrum
Base Stations
• 3GPP2 C. S0011 Recommended Minimum Performance Standards for cdma2000 Spread Spectrum
Mobile Stations
These documents define complex, multi-part measurements used to create and maintain an
interference-free environment. For example, the documents include standardized test methods for the
measurement of power in a carrier, a spectrum emission mask, and other critical measurements.
The instrument automatically makes these measurements using the measurement methods and limits
defined in the documents. The detailed results displayed by the measurements enable you to analyze
cdma2000 system performance. You may alter the measurement parameters for specialized analysis. For
infrastructure test, the test set tests transmitters of base stations in a non-interfering manner using a
coupler or power splitter.
This test set makes the following measurements of cdma2000 signals:
• Channel Power
• Adjacent Channel Power (ACP)
• Spectrum Emission Mask
• Occupied BW
•Code Domain
• Modulation Accuracy (Composite RHO)
• QPSK EVM