397
ACP Measurement
Marker
Properties
Accesses the marker properties menu. Note that this key is unavailable when “Meas Method” on
page 433 is set to RBW.
Select Marker
Displays 12 markers available for selection. Note that this key is unavailable when “Meas Method” on
page 433 is set to RBW
Relative To
Selects the desired marker. The selected marker will be relative to its reference marker.
Notes Since the result value is always calculated from acquisition data, the default
value is arbitrary. Although the Preset/Default values are defined.
Dependencies Unavailable when “Meas Method” on page 433 is set to RBW.
Preset Result dependent on markers setup and signal source.
State Saved No
Backwards Compatibility SCPI :CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:FUNCtion:RESult
?
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00
Key Path Marker
Initial S/W Revision Prior to A.02.00
Key Path Marker
Initial S/W Revision Prior to A.02.00
Key Path Marker, Properties
Mode WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD
Remote Command :CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:R
EFerence <integer>
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:R
EFerence?
Example CALC:ACP:MARK2:REF 6
CALC:ACP:MARK2:REF?