517
Spectrum Emission Mask Measurement
Meas Setup
Stop Fre qSpecifies the stop frequency for the currently selected offset.Preset:
(Cont)
For modes (except WLAN), the preset value is as follows.
WCDMA: ON, ON, ON, ON, ON, OFF|ON, ON, ON, ON, OFF, OFF
C2K: ON, ON, ON, OFF, OFF, OFF|ON, ON, OFF, OFF, OFF, OFF
WIMAX OFDMA: ON, ON, ON, OFF, OFF, OFF|ON, ON, ON, OFF, OFF,
OFF
TD-SCDMA: ON, ON, ON, ON, OFF, OFF|ON, ON, ON, OFF, OFF, OFF
1xEVDO: ON, ON, ON, OFF, OFF, OFF| ON, ON, OFF, OFF, OFF, OFF
LTE, LTETDD: ON, ON, ON, OFF, OFF, OFF|ON,ON,ON,ON,OFF,OFF
---------------
WLAN:
if Radio Std is 802.11a/g(OFDM/DSSS-OFDM)/802.11n(20MHz/40MHz):
ON, ON, ON, ON, OFF, OFF, OFF, OFF, OFF, OFF, OFF, OFF
if Radio Std is 802.11ac (20 MHz/ 40 MHz/ 80 MHz/ 160 MHz): ON, ON,
ON, ON, OFF, OFF, OFF, OFF, OFF, OFF, OFF, OFF
if Radio Std is 802.11ac (80 MHz + 80 MHz): ON, ON, ON, ON, ON, ON,
ON, OFF, OFF, OFF, OFF, OFF
State Saved: Saved in instrument state.
Min: 0 Hz
Max: Stop Freq minus (-) 100 Hz (for that offset)
Initial S/W Revision: Prior to A.02.00
Modified at S/W Revision: A.02.00, A.03.00, A.10.00, A.11.00
Key Path: Meas Setup, Offset/Limits
Mode: WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD,
WLAN
Remote Command: [:SENSe]:SEMask:OFFSet[1]|2:LIST:FREQuency:STOP <freq>,
…
[:SENSe]:SEMask:OFFSet[1]|2:LIST:FREQuency:STOP?
Example: SEM:OFFS:LIST:FREQ:STOP 2.715 MHz, 3.515 MHz, 4.00 MHz, 8.00
MHz, 12.50 MHz, 15.0 MHz
SEM:OFFS:LIST:FREQ:STOP?