Agilent Technologies U9072A cdma-2000 - page 1245

1245
Source (Internal)
Segments in ARB Memory
This key functions the same as “Segments in ARB Memory” on page 1178.
Delete Segment From ARB Memory
This key functions the same as “Delete Segment From ARB Mem” on page 1178.
Delete All From ARB Memory
This key functions the same as “Delete All From ARB Memory” on page 1178.
Step Duration
Allows access to the sub-menus for setting up the duration of play for the current step.
The duration can be set to be either the number of times for the ARB file associated with the sequence to
play, or a specific time value, or continuous. If the step is set to play a CW tone, the step duration cannot
be set to a play count.
Key Path: Source, List Sequencer, List Sequencer Setup, Waveform, Segments in
ARB Memory
Initial S/W Revision: Prior to A.09.00
Key Path: Source, List Sequencer, List Sequencer Setup, Waveform, Segments in
ARB Memory, Segment in ARB Memory
Initial S/W Revision: Prior to A.09.00
Key Path: Source, List Sequencer, List Sequencer Setup, Waveform, Segments in
ARB Memory, Segment in ARB Memory
Initial S/W Revision: Prior to A.09.00
Key Path: Source, List Sequencer, List Sequencer Setup
Remote Command: :SOURce:LIST:STEP[1]|2|3…1000:SETup:DURation:TYPE
TIME|COUNt|CONTinuous
:SOURce:LIST:STEP[1]|2|3…1000:SETup:DURation:TYPE?
Example: SOUR:LIST:STEP2:SET:DUR:TYPE TIME
SOUR:LIST:STEP2:SET:DUR:TYPE?
Notes: SCPI is supported after A.09.40
Notes: If “Step Duration” is set to “Time” or “Play Count” for the last step, the last
step of ARB keeps playing as if set to “Continuous”, until the set “Time” has
expired or until the “Play Count” setting is reached.
Range: Time | Play Count | Continuous
Initial S/W Revision: A.05.00