215
System Functions
Save
When you continue on into the Save As menu and complete the Screen Image save, the image depicted
in the thumbnail is the one that gets saved, showing the menus that were on the screen before going into
the Save menus. The save is performed immediately and does not wait until the measurement is
complete.
After you have completed the save, the Quick Save front-panel key lets you quickly repeat the last save
performed, using an auto-named file, with the current screen data.
NOTE For versions previous to A.01.55, if you initiate a screen image save by navigating
through the Save menus, the image that is saved will contain the Save menu
softkeys, not the menus and the active function that were on the screen when you
first pressed the Save front panel key.
Key Path: Save
Mode: All
Remote Command: :MMEMory:STORe:SCReen <filename>
Example: :MMEM:STOR:SCR "myScreen.png"
This stores the current screen image in the file MyScreenFile.png in the
default directory.
Initial S/W Revision: Prior to A.02.00