556
Spectrum Emission Mask Measurement
Span X Scale
Span X Scale
Accesses a menu of functions that enable you to set the horizontal scale parameters.
Ref Value
Sets the X reference value.
Scale/Div
Sets the horizontal scale.
Key Path: Front-panel key
Initial S/W Revision: A.11.00
Key Path: SPAN X Scale
Mode: WCDMA, CDMA2K, EDGEGSM, WIMAXOFDMA, TDSCDMA,
CDMA1XEV, LTE, LTETDD, WLAN
Remote Command: :DISPlay:SEMask:VIEW[1]:WINDow[1]:TRACe:X[:SCALe]:RLEVe
l <freq>
:DISPlay:SEMask:VIEW[1]:WINDow[1]:TRACe:X[:SCALe]:RLEVe
l?
Example: DISP:SEM:VIEW:WIND:TRAC:X:RLEV 10
DISP:SEM:VIEW:WIND:TRAC:X:RLEV?
Notes: You must be in the mode that includes SEM measurement to use this
command. Use :INSTrument:SELect to set the mode.
Couplings: If Auto Scaling is set to On, this value is automatically determined by the
measurement result. When you set this value manually, Auto Scaling
automatically changes to Off.
Preset: 1.0 GHz
State Saved: Saved in instrument state.
Min: –1000 GHz
Max: 1000 GHz
Default Unit: Hz
Initial S/W Revision: A.11.00
Key Path: SPAN X Scale
Mode: WCDMA, CDMA2K, EDGEGSM, WIMAXOFDMA, TDSCDMA,
CDMA1XEV, LTE, LTETDD, WLAN