1332
Trace/Detector
To Tra ce
Selects the trace to be copied from or exchanged with the From Trace
Copy Now
Executes the Copy operation and puts the destination trace in Update = Off, Display = On.
Exchange Now
Executes the Exchange operation and puts both traces in Update = Off, Display = On.
Send/Query Trace Data (Remote Command Only)
This command allows trace data to be sent to the test set or queried from the test set. The response to the
query is a list of the amplitude points which comprise the requested trace in the current Y-axis unit of the
test set. The X-axis unit is that of the destination trace (for send) or the source trace (for query).
See “Query Trace Data” on page 1333.
See “More Information” on page 1333.
Key Path Trace/Detector, Copy/Exchange
Notes See “Copy/Exchange”.
Preset 2
Initial S/W Revision Prior to A.02.00
Key Path Trace/Detector, Copy/Exchange
Notes See “Copy/Exchange”.
Initial S/W Revision Prior to A.02.00
Key Path Trace/Detector, Copy/Exchange
Notes See “Copy/Exchange”.
Initial S/W Revision Prior to A.02.00
Remote Command: :TRACe[:DATA] TRACE1 | TRACE2 | TRACE3 | TRACE4 | TRACE5
| TRACE6, <data>