1115
Peak Search
Figure 1- 3Below Display Line Peak Identification
All
Sets the peak table to display the 20 highest peaks in the order specified by the current Peak Sort setting.
If the Peak Criteria are turned on, then only peaks that meet the defined Pk Excursion and Pk Threshold
values are found.
Above Display Line
Sets the peak table to display only the 20 highest peaks above the display line in the order specified by
the current Sort setting. If the Peak Criteria are turned on, then only peaks that meet the defined criteria
are found. If the display line is not already on, it is turned on (it has to be on or it cannot be used to
exclude peaks).
Below Display Line
Sets the peak table to display only the 20 highest peaks below the display line as defined by the peak in
Key Path Peak Search, Peak Table, Peak Readout
Example CALC:MARK:PEAK:TABL:READ ALL
Notes Auto return after pressed
Readback All
Initial S/W Revision Prior to A.02.00
Key Path Peak Search, Peak Table, Peak Readout
Example CALC:MARK:PEAK:TABL:READ GTDL
Notes Auto return after pressed
Dependencies When Above Display Line is selected, Display Line is turned on and becomes
the active function.
Readback Above DL
Initial S/W Revision Prior to A.02.00
ThresholdDisplay Line
peak not listed
Display LineThreshold
peak not listed peak listed
pk_belowdl.vsd