406
ACP Measurement
Meas Setup
Ref CarrierSets the reference carrier. Relative power measurements are made from the reference carrier.If set to Auto, the measurement selects the carrier with the highest power as the reference carrier and the Ref Carrier parameter is updated. If a value is entered when Ref Carrier Mode is set to Auto, the mode changes to Man.If set to Man, the value that you enter for the Ref Carrier is used as the reference carrier.
Example ACP:CARR:COUN 1
ACP:CARR:COUN?
Notes Carrier sub op code. 1 for BTS, 2 for MS. Default is BTS.
You must be in the mode that includes ACP measurements to use this
command. Use :INSTrument:SELect to set the mode.
Dependencies When Number of Carriers is 1, Ref Carrier is grayed out.
If N9060A-5FP license is enabled, Max of Carrier is 18, otherwise, Max of
Carrier is 12.
Couplings Changing this parameter might affect to the Span.
Preset 1
State Saved Saved in instrument state.
Min 1
Max 12
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00
Key Path Meas Setup, Carrier Setup
Mode WCDMA, C2K, WIMAX OFDMA, 1xEVDO, TD-SCDMA, LTE, LTETDD
Remote Command [:SENSe]:ACPower:CARRier[1]|2:RCARrier <integer>
[:SENSe]:ACPower:CARRier[1]|2:RCARrier?
[:SENSe]:ACPower:CARRier[1]|2:RCARrier:AUTO OFF|ON|0|1
[:SENSe]:ACPower:CARRier[1]|2:RCARrier:AUTO?
Example ACP:CARR:RCAR 1
ACP:CARR:RCAR?
ACP:CARR:RCAR:AUTO OFF
ACP:CARR:RCAR:AUTO?
Notes Carrier sub op code. 1 for BTS, 2 for MS. Default is BTS.
You must be in the mode that includes ACP measurements to use this
command. Use :INSTrument:SELect to set the mode.