188
System Functions
Mode Preset
state.
Remote Command: *RST
Example: *RST
Notes: Sequential
Clears all pending OPC bits and the Status Byte is set to 0.
Couplings: A *RST will cause the currently running measurement to be aborted and cause
the default measurement to be active. *RST gets the mode to a consistent state
with all of the default couplings set.
Backwards Compatibility Notes: In legacy analyzers *RST did not set the analyzer to Single, but in the
X-Series it does, for compliance with the IEEE 488.2 specification.
In the X-Series, *RST does not do a *CLS (clear the status bits and the error
queue). In legacy analyzers, *RST used to do the equivalent of
SYSTem:PRESet, *CLS and INITiate:CONTinuous OFF. But to be 488.2
compliant, *RST in the X-Series does not do a *CLS.
Initial S/W Revision: Prior to A.02.00