400
ACP Measurement
Marker
Backward Compatibility Remote Commands

Sets or queries the state of a marker. Setting a marker which is off to the on state or 1 puts it in Normal

mode and places it at the center of the screen.
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00
Mode WCDMA, WIMAX OFDMA, C2K, TD-SCDMA, 1xEVDO, LTE, LTETDD
Remote Command :CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10|11|1 2:S
TATe OFF|ON|0|1
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:S
TATe?
Example CALC:ACP:MARK2:STAT ON
CALC:ACP:MARK2:STAT?
Notes This parameter is also accessed from Marker, Properties, 1
You must be in the mode that includes ACP measurements to use this
command. Use :INSTrument:SELect to set the mode.
Preset OFF|OFF|OFF|OFF|OFF|OFF|OFF|OFF|OFF|OFF|OFF|OFF
State Saved Saved in instrument state.
Range On|Off
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00