387
ACP Measurement
BW
BW
Accesses a menu of functions that enable you to specify and control the video and resolution bandwidths. You can also select the type of filter for the measurement and set the filter bandwidth.
Res BW
Sets the value of the resolution bandwidth. If an unavailable bandwidth is entered with the numeric keypad, the closest available bandwidth is selected.
Key Path Front-panel key
Initial S/W Revision Prior to A.02.00
Key Path BW
Mode WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD
Remote Command [:SENSe]:ACPower:BANDwidth[:RESolution] <bandwidth>
[:SENSe]:ACPower:BANDwidth[:RESolution]?
[:SENSe]:ACPower:BANDwidth[:RESolution]:AUTO ON|OFF|1|0
[:SENSe]:ACPower:BANDwidth[:RESolution]:AUTO?
Example ACP:BAND 25kHz
ACP:BAND?
ACP:BAND:AUTO ON
ACP:BAND:AUTO?
Notes This key is available only in IBW mode.
This parameter is preset by the Meas Method selection. Preset values are as
follows:
IBW: 100 kHz
IBWR: 27 kHz
FAST (WCDMA): 390 kHz
You must be in the mode that includes ACP measurements to use this
command. Use :INSTrument:SELect to set the mode.
Couplings The resolution bandwidth is coupled to the video bandwidth based on the
video to resolution bandwidth ratio setting if AUTO is selected.