328
Channel Power Measurement
Marker
Marker Y Axis Value (Remote Command only)
Returns the marker Y Axis value in the current marker Y Axis unit.
Properties
Accesses the marker properties menu.
Select Marker
Displays 12 markers available for selection.
Example: CALC:CHP:MARK10:X:POS 0
CALC:CHP:MARK10:X:POS?
Notes: The query returns the marker’s absolute X Axis value in trace points if the
control mode is Normal, or the offset from the marker’s reference marker in
trace points if the control mode is Delta.
Preset: After a preset, all markers are turned OFF, so Marker X Axis Value query
returns a not a number (NAN).
State Saved: Saved in instrument state.
Min: –9.9E+37
Max: 9.9E+37
Initial S/W Revision: Prior to A.02.00
Modified at S/W Revision: A.02.00, A.03.00
Mode: WCDMA, C2K, WIMAX OFDMA, 1xEVDO, LTE, LTETDD, WLAN
Remote Command: :CALCulate:CHPower:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:Y
?
Example: CALC:CHP:MARK11:Y?
Preset: Result dependent on Markers setup and signal source.
State Saved: Saved in instrument state.
Initial S/W Revision: Prior to A.02.00
Modified at S/W Revision: A.02.00, A.03.00
Key Path: Marker
Initial S/W Revision: Prior to A.02.00
Key Path: Marker
Initial S/W Revision: Prior to A.02.00