278
System Functions
System
Disabled
Disables the GPIB Controller capability, this is the default (or normal) setting.
Enabled
Enables the GPIB Controller capability.
SCPI LAN
Activates a menu for identifying and changing the SCPI over a LAN configuration. There are a number
of different ways to send SCPI remote commands to the instrument over LAN. It can be a problem to
have multiple users simultaneously accessing the instrument over the LAN. These keys limit that
somewhat by disabling the telnet, socket, and/or SICL capability.
SCPI Telnet
Turns the SCPI LAN telnet capability On or Off allowing you to limit SCPI access over LAN through
telnet.
Notes: When the instrument becomes the Controller bit 0 in the Standard Event
Status Register is set (and when the instrument relinquishes Controller
capability bit 0 is cleared in the Standard Event Status Register).
Preset: This is unaffected by Preset but is set to OFF on a “Restore System
Defaults->Misc”
State Saved: No
Range: Disabled|Enabled
Initial S/W Revision: A.02.00
Key Path: System, I/O Config, GPIB, GPIB Controller
Example: :SYST:COMM:GPIB:CONT OFF Will set GPIB port to Device
Initial S/W Revision: A.02.00
Key Path: System, I/O Config, GPIB, GPIB Controller
Example: :SYST:COMM:GPIB:CONT ON Will set GPIB port to Controller
Initial S/W Revision: A.02.00
Key Path: System, I/O Config
Initial S/W Revision: Prior to A.02.00
Key Path: System, I/O Config, SCPI LAN
Mode: All