428
ACP Measurement
Meas Setup
Fail Mask
Accesses a menu that enables you to select one of the logic keys for the fail conditions between the
measurement results and the test limits. The setting defines the type of testing to be done at any custom
offset frequencies. The measured powers are tested against the absolute values defined with
[:SENSe]:ACP:OFFSet[n]:LIST:ABSolute, or the relative values defined with
[:SENSe]:ACP:OFFSet:LIST:RPSDensity and [:SENSe]:ACP:OFFSet:LIST:RCARrier.
You can turn off (not use) specific offsets with the [:SENS]:ACP:OFFSet:LIST:STATe command.
• Absolute – Fail is shown if one of the absolute ACP measurement results is larger than the limit for
Abs Limit.
• Relative – Fail is shown if one of the relative ACP measurement results is larger than the limit for Rel
Lim (Car) or Rel Lim (PSD).
• Abs AND Rel – Fail is shown if one of the absolute ACP measurement results is larger than the limit
for Abs Limit AND one of the relative ACP measurement results is larger than the limit for Rel Lim
(Car) or Rel Lim (PSD).
• Abs OR Rel– Fail is shown if one of the absolute ACP measurement results is larger than the limit for
Abs Limit OR one of the relative ACP measurement results is larger than the limit for Rel Lim (Car)
or Rel Lim (PSD).
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00
Key Path Meas Setup, Offset/Limits, Limits
Mode WCDMA, C2K, 1xEVDO, LTE
Remote Command [:SENSe]:ACPower:OFFSet[1]|2:LIST:TEST
ABSolute|AND|OR|RELative, ABSolute|AND|OR|RELative,
ABSolute|AND|OR|RELative, ABSolute|AND|OR|RELative,
ABSolute|AND|OR|RELative, ABSolute|AND|OR|RELative
[:SENSe]:ACPower:OFFSet[1]|2:LIST:TEST?
Example ACP:OFFS2:LIST:TEST ABS,ABS,ABS,ABS,ABS,ABS
ACP:OFFS2:LIST:TEST?
Notes Offset sub op code. 1 for BTS, 2 for MS. Default is BTS.
You must be in the mode that includes ACP measurements to use this
command. Use :INSTrument:SELect to set the mode.
Preset WCDMA, C2K: REL, REL, REL, REL, REL, REL| REL, REL, REL, REL,
REL, REL
CDMA1xEVDO: REL, REL, ABS, REL, REL, REL| REL, REL, ABS, REL,
REL, REL
LTE: AND, AND, AND, AND, AND, AND| AND, AND, AND, AND, AND,
AND
State Saved Saved in instrument state.