281
System Functions
System
SCPI Socket Control Port (Remote Command Only)
Returns the TCP/IP port number of the control socket associated with the SCPI socket session. This
query enables you to obtain the unique port number to open when a device clear is to be sent to the
instrument. Every time a connection is made to the SCPI socket, the instrument creates a peer control
socket. The port number for this socket is random. The user must use this command to obtain the port
number of the control socket. To force a device clear on this socket, open the port and send the string
“DCL ” to the instrument.
If this SCPI command is sent to a non SCPI Socket interface, then 0 is returned.
Reset Web Password
The embedded web server contains certain capability which are password protected; modifying the LAN
configuration of the instrument, and access to web pages that can change the settings of the instrument.
The default password from the factory is ‘agilent’ (without the quotes). The control provided here is the
means to set the web password as the user desires, or to reset the password to the factory default.
Selecting Reset web password brings up a control for resetting the password as the user desires, or to the
factory default. A keyboard is required to change the password from the factory default of ‘agilent’ or to
set a new password that contains alphabetic characters. The control is:
If this control is entered without an external keyboard or mouse connected, you can cancel the control by
Range: On | Off
Initial S/W Revision: A.11.00
Mode: All
Remote Command: :SYSTem:COMMunicate:LAN:SCPI:SOCKet:CONTrol?
Example: :SYST:COMM:LAN:SCPI:SOCK:CONT?
Preset: This is unaffected by Preset or “Restore System Defaults->Misc”.
State Saved: No
Range: 0 to 65534
Initial S/W Revision: Prior to A.02.00