Agilent Technologies U9072A cdma-2000 Method for Carrier (Backward Compatibility SCPI)

440
ACP Measurement
Meas Setup
Method for Carrier (Backward Compatibility SCPI)
Notes This parameter is not available for cdma2000 and 1xEVDO
The backwards Compatibility SCPI command,
[:SENSe]:ACPR:FILTer[:RRC]:ALPHa, is provided to support same
functionality as [:SENSe]:ACPr:FILTer[:RRC]:ALPHa (PSA W-CDMA, PSA
cdma2000 and PSA 1xEVDO) due to ACPr node conflicts with ACPower
node.
You must be in the mode that includes ACP measurements to use this
command. Use :INSTrument:SELect to set the mode.
Couplings This command is an alias to
[:SENSe]:ACPower:OFFSet[1]|2:LIST:FILTer:ALPhHa
Sending the commands to set values of all offsets for BS and MS, however,
sending the query always return a value of BS Offset A.
Preset WCDMA, LTE, LTETDD: 0.22
C2K: NO
State Saved Saved in instrument state.
Min 0.01
Max 1.00
Backwards Compatibility SCPI [:SENSe]:ACPR:FILTer[:RRC]:ALPHa
[:SENSe]:MCPower:FILTer[:RRC]:ALPHa
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00
Key Path SCPI Only
Mode WCDMA, LTE, LTETDD
Remote Command [:SENSe]:ACPower:CARRier[1]|2:LIST:METHod IBW|RRC, …
[:SENSe]:ACPower:CARRier[1]|2:LIST:METHod?
Example ACP:CARR2:LIST:METH RRC
ACP:CARR2:LIST:METH?
Notes You must be in the mode that includes ACP measurements to use this
command. Use :INSTrument:SELect to set the mode.
Maximum of Array length depends on the number of carriers.