394
ACP Measurement
Marker
Marker
Accesses a menu that enables you to select, set up and control the markers for the current measurement.
Note that this key and all sub keys are unavailable when “Meas Method” on page 433 is set to RBW
Select Marker
Displays 12 markers available for selection. Note that this key and all sub keys are unavailable when
“Meas Method” on page 433 is set to RBW
Marker Type
Sets the marker control mode to Normal, Delta, Fixed or Off. All interactions and dependencies detailed
under the key description are enforced when the remote command is sent. If the selected marker is Off,
pressing Marker sets it to Normal and places it at the center of the screen on the trace determined by the
Marker Trace rules. At the same time, Marker X Axis Value appears on the Active Function area.
The default active function is the active function for the currently selected marker control mode. If the
current control mode is Off, there is no active function and the active function is turned off.
Key Path Front-panel key
Initial S/W Revision Prior to A.02.00
Key Path Marker
Initial S/W Revision Prior to A.02.00
Key Path Marker
Mode WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD
Remote Command :CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10|11|1 2:M
ODE POSition|DELTa|OFF
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:M
ODE?
Example CALC:ACP:MARK2:MODE DELT
CALC:ACP:MARK2:MODE?