336
Channel Power Measurement
Meas Setup
Integ BW

Specifies the range of integration used in calculating the power in the channel. The integration

bandwidth (IBW) is displayed on the trace as two markers connected by an arrow.

Key Path: Meas Setup
Mode: WCDMA, C2K, WIMAX OFDMA, 1xEVDO, LTE, LTETDD, WLAN
Remote Command: [:SENSe]:CHPower:BANDwidth:INTegration <bandwidth>
[:SENSe]:CHPower:BANDwidth:INTegration?
Example: CHP:BAND:INT 10MHz
CHP:BAND:INT?
Notes: You must be in the W-CDMA mode, cdma2000 mode, LTD mode, LTE TDD
mode, WLAN mode, 1xEVDO mode, or WIMAX OFDMA mode to use this
command. Use :INSTrument:SELect to set the mode.
Couplings: The minimum value of the span is coupled with the integration bandwidth.
Preset: WCDMA: 5 MHz
C2K: 1.23 MHz
WIMAX OFDMA: 10 MHz
1xEVDO: 1.23 MHz
LTE: 5 MHz
LTETDD: 5 MHz
WLAN:
if Radio Std is 802.11a/g(OFDM/DSSS-OFDM): 20 MHz
if Radio Std is 802.11b: 25 MHz
if Radio Std is 802.11n(20MHz): 20 MHz
if Radio Std is 802.11n(40MHz: 40 MHz
if Radio Std is 802.11ac (20 MHz): 20 MHz
if Radio Std is 802.11ac (40 MHz): 40 MHz
if Radio Std is 802.11ac (80 MHz): 80 MHz
if Radio Std is 802.11ac (160 MHz): 160 MHz
if Radio Std is 802.11ac (80 MHz + 80 MHz): 80 MHz
State Saved: Saved in instrument state.
Min: 100 Hz
Max: 1 GHz
Max: RF Input: 1 GHz
Initial S/W Revision: Prior to A.02.00