693
Code Domain
Meas Setup
Chip Rate
Allows you to Changes the chip rate.
Walsh Code QOF (BTS only)
Opens a menu to set the QOF number.
IF Gain
Enables you to control an internally switched IF amplifier with approximately 10 dB of gain. When it
can be turned on without an overload, the dynamic range is always better with the amplifier on than off.
The IF Gain key can be used to set the IF Gain function to Auto, or to On (the extra 10 dB) or Off. These
Mode cdma2000
Remote Command [:SENSe]:CDPower:CRATe <freq>
[:SENSe]:CDPower:CRATe?
Example CDP:CRAT 1228800
CDP:CRAT?
Preset 1.2288 MHz
State Saved Saved in instrument state.
Min 1.105920 MHz
Max 1.351680 MHz
Key Path Meas Setup, Advanced
Remote Command [:SENSe]:CDPower:QOF 0|1|2|3
[:SENSe]:CDPower:QOF?
Example CDP:QOF 2
CDP:QOF?
Restriction and Notes Choose among QOF = 0, 1, 2, or 3 for the specific Walsh Code that is selected. This
key is available only on the BTS Mode.
Dependencies/Couplings Only available when [:SENS2]:RADio:DEVice is BTS.
when [:SENS2]:RADio:DEVice is MS, This Menu is grayed out.
Preset 0
State Saved Saved in instrument state.
Min 0
Max 3
Key Path Meas Setup, Advanced