967
Input/Output
Correct Source
Sets the corrections for the multiport adapter RFIO 0 port to be applied to the source.
Correct Analyzer
Sets the corrections for the multiport adapter RFIO 0 port to be applied to the analyzer.
Correct Source and Analyzer
Sets the corrections for the multiport adapter RFIO 0 port to be applied to both the source and the analyzer.
RFIO1
The port to which the current corrections will be applied. Pressing this key again allows the user access to the
menu for specifying to which internal device and multiport adapter RF path the corrections for multiport adapter
RFIO 1 are applied.
Key Path: Input/Output, RF Output & Test Set Config, Multiport Adapter,
Corrections, Properties, RF Port, RFIO 0
Example: :MPAD:CORR:CSET[1]|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16:RF:PORT:RFIO0
SOUR
Readback: "Correct Source"
Initial S/W Revision: A.10.0
Key Path: Input/Output, RF Output & Test Set Config, Multiport Adapter,
Corrections, Properties, RF Port, RFIO 0
Example: :MPAD:CORR:CSET[1]|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16:RF:PORT:RFIO0
ANAL
Readback: "Correct Analyzer"
Initial S/W Revision: A.10.0
Key Path: Input/Output, RF Output & Test Set Config, Multiport Adapter,
Corrections, Properties, RF Port, RFIO 0
Example: :MPAD:CORR:CSET[1]|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16:RF:PORT:RFIO0
BOTH
Readback: "Correct Source and Analyzer"
Initial S/W Revision: A.10.0
Key Path: Input/Output, RF Output & Test Set Config, Multiport Adapter,
Corrections, Properties, RF Port
Remote Command: [:SENSe]:MPADapter:CORRection:CSET[1]|2|3|4|5|6|7|8|9|1
0|11|12|13|14|15|16:RF:PORT:RFIO1 SOURce |ANALyzer |BOTH
[:SENSe]:MPADapter:CORRection:CSET[1]|2|3|4|5|6|7|8|9|1
0|11|12|13|14|15|16:RF:PORT:RFIO1?
Example: :MPAD:CORR:CSET:RF:PORT:RFIO1 BOTH